Docs · Recipes

Pin a PHP version

Choose which PHP language version a project builds against. Several versions (8.3, 8.4, 8.5) live side by side in one php-esp32 install; the [php] version key picks one per project, and leaving it empty follows the firmware default.

An installed php-esp32 carries more than one PHP language version at once. Each is a self-contained directory under components/php/versions/ — 8.3.33, 8.4.24, 8.5.9 — and they coexist: nothing is shared or switched globally. A project picks the one it builds against, and that choice is one line of config. Leave it empty and the project follows the firmware's own default version, so most projects never set it at all.

What you need

php-esp32 installed (phpflash system-setup), with at least one PHP version under components/php/versions/. A stock install ships several.
A project with a php-esp32.config.toml (from phpflash init).

Which key controls it

The version is [php] version in php-esp32.config.toml. Its value is one of the directory names under components/php/versions/ — a full MAJOR.MINOR.PATCH, for example 8.5.9. Empty (or absent) means "follow the repo default": phpflash reads default_version from php-esp32's php-esp32.toml and builds that.

Not the same as [php-esp32] version

[php] version is the PHP language version — a directory under components/php/versions/. The unrelated [php-esp32] version in the [php-esp32] table is a git ref for the firmware checkout (which php-esp32 commit to use), not a PHP version. Set the PHP language version under [php].

Seeing what is installed

The versions available to a project are exactly the directory names under components/php/versions/ in your php-esp32 checkout — each one is a complete, self-contained version.

bash list the installed PHP versions

ls ~/esp/php-esp32/components/php/versions/
# 8.3.33  8.4.24  8.5.9

phpflash reads this same list. During phpflash init, when more than one version is installed, it adds a PHP version prompt, marking the repo default (default); picking the default leaves [php] version empty, and picking any other pins that exact string into the config. And if you name a version that is not installed, the build refuses with the list of what is available:

text an unknown version fails the build

PHP version "8.6.0" is not installed in /home/you/esp/php-esp32 (available: 8.3.33, 8.4.24, 8.5.9)

Config

Pin the version by setting [php] version to one of the installed directory names. This project builds against PHP 8.5.9 regardless of what the firmware's default happens to be:

toml php-esp32.config.toml

name         = "my-project"
storage_type = "microsd"
type         = "init-loop"

[board]
target = "esp32-p4-pico"
port   = ""                # empty = autodetect at flash time

[php]
src     = "project-src"
entry   = "index.php"
version = "8.5.9"          # a directory under components/php/versions/;
                           # empty = follow the firmware's default_version

Leave it empty to track the default

If you do not care which minor you build against, omit version (or set it to ""). The project then follows default_version from php-esp32's php-esp32.toml, so an install that bumps its default carries your project forward with it — no per-project edit.

Build

phpflash build resolves the version — the pinned [php] version, or the repo default when it is empty — and passes it straight to the firmware build as -DPHP_VERSION=<version>.

bash build, flash, monitor

phpflash build && phpflash flash && phpflash monitor

What you'll see

The engine reports the version it was built with in the boot banner and from PHP_VERSION, so the pin is easy to confirm on the serial console:

text serial output (excerpt)

php-esp32: php_embed_init()...
PHP 8.5.9 on ESP32-P4

Because each version is its own directory, switching is just editing [php] version and rebuilding — the versions do not interfere, and one php-esp32 install serves projects pinned to different PHP versions at the same time. For the firmware side of what changes between versions, see the php-esp32 docs.

To add native functions of your own on top of the version you pinned, continue to Scaffold a C extension.

Last updated · 2026-09-04

Edit on GitHub Report issue

← Previous

The php-esp32 manifest

Scaffold a C extension